Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
LiftMaster openers
Before
After
Before
After
Before
AfterSpring Repair in Carrollton, TX
Garage door spring repair in Carrollton typically costs between $240 and $480, depending on the cycle rating of the springs and the specific door weight. If you hear a loud bang in your garage or notice the door won’t lift more than a few inches, your torsion spring has likely snapped. At Servo Garage Doors Carrollton, we provide flat, written pricing before a single tool touches your garage door, adhering to Clause 1 of The Haven Standard. If you are experiencing a spring failure, call us at (817) 527-9864 for a prompt assessment.
A broken spring is the most common mechanical failure we see across the DFW metroplex. Because we operate as an independently owned and operated business under The Haven Standard, we don’t guess at repairs or upsell parts you don’t need. We photograph the failed component-whether it’s a snapped torsion spring or a worn-out cable-to show you exactly what happened before we provide a written estimate. This evidence-based approach is part of our commitment to transparency for every homeowner in Carrollton. For more extensive mechanical issues, you can always visit our main Garage Door Repair in Carrollton page to see how we handle broader system failures.
When You Need Spring Repair
You don’t always need a professional to know when a spring has failed, but you absolutely need one to fix it safely. Garage door springs are under immense tension; attempting to adjust or remove them without specialized training is dangerous. Here are the specific signs that indicate your springs have reached the end of their service life:
- The “Loud Bang” Phenomenon: When a torsion spring snaps, it releases all its stored energy instantly, sounding like a gunshot or a firecracker going off inside your garage. This is the most common indicator of a clean break.
- Door Won’t Lift: If your opener struggles to lift the door or stops moving after just a few inches, the spring is no longer providing the counterbalance weight. Do not force the motor to run, as this can strip the gears.
- Visible Gap in the Coil: Torsion springs are mounted on a shaft above the door. If you look up and see a 1-to-2-inch separation in the metal coils, the spring has snapped.
- Door Crookedness: If the door rises unevenly or looks tilted when it tries to move, one spring may have failed while the other is still holding partial tension.
- Cables Hanging Loose: When a spring breaks, the tension on the cables is lost. You might see cables dangling or loose near the drums on the sides of the door.
In neighborhoods like Indian Creek or near the Josey Ranch area, we frequently see springs fail earlier than expected due to the extreme temperature fluctuations we experience in North Texas. These rapid shifts from hot summers to cold winter snaps cause metal fatigue. Whether you have a heavy wooden door or a lighter steel Garage Door Repair installation, we carry the correct spring sizes to restore your door’s balance properly.
Our Spring Repair Process
We follow a strict, documented protocol for every spring replacement. Our goal is to ensure your door operates safely and reliably for years to come. We do not use “call for a quote” tactics; we provide a clear, written price before we start.
- Initial Inspection and Photo Record: Upon arrival, our technician inspects the entire door system. Per Clause 4 of The Haven Standard, we document the failed part with a photograph. You see exactly what is broken before we propose any solution.
- Written Scope and Price: We provide a flat, written price for the repair. This includes the cost of the new springs, the labor, and the necessary safety checks. You approve this before we begin work.
- System Tension Release: Using specialized winding bars, we carefully release the remaining tension from the unbroken spring (if only one failed). This is a critical safety step to prevent injury during the repair.
- Spring Replacement: We remove the old, broken springs and install new, high-cycle torsion springs. We match the wire diameter and coil length to the specific weight of your door-whether it’s a standard residential door or a heavier insulated Garage Door Repair model.
- Balance and Tension Calibration: Once the new springs are mounted, we wind them to the exact tension required for your door’s weight. We then perform a balance test; the door should stay open halfway without the opener’s help.
- Safety Check and Documentation: We lubricate the rollers and hinges, check the cables for fraying, and verify that the safety sensors are aligned. You receive a final photo record of the completed work.
If you have received an estimate from another company, we offer a Free Second Opinion. Bring us their written estimate, and we will verify if the work is actually required and provide our own transparent pricing. We stand by our work with our 365-Day Done Right Promise.
BeforeAfterSpring Repair Pricing in Carrollton
We believe in upfront pricing. There are no surprise fees or hidden “trip charges” when we arrive at your home. The cost of spring repair depends primarily on the wire gauge, the length of the spring, and the required cycle rating (how many times the door opens and closes before the spring wears out); for a broader look at pricing, see our guide on How Much Does Garage Door Repair Cost? (2026 Price Guide) - Carrollton, TX.
| Service Item | Typical Price Range |
|---|---|
| Single Torsion Spring Replacement | $240 – $340 |
| Dual Torsion Spring Replacement | $340 – $480 |
| High-Cycle Spring Upgrade (Extended Life) | Add $60 – $100 to standard pricing |
| Emergency Service Fee (After Hours) | $50 – $95 |
Many homeowners in Carrollton opt for high-cycle springs. These are built with thicker wire or different coil configurations to last longer in our climate. While the upfront cost is slightly higher, they often provide better value over the life of the door. Call (817) 527-9864 to get an exact quote for your specific setup. We don’t guess-we calculate the weight and provide the price.
FAQs - Spring Repair
How much does it cost to fix a garage door spring in Carrollton?
You can expect to pay between $240 and $480 for professional torsion spring replacement in Carrollton. This price includes the cost of the springs, the labor to install them, and the necessary balance calibration, with all pricing provided in writing before work begins. If your door also needs Track Realignment, we can address that during the same visit.
Is it cheaper to repair or replace the spring?
Springs cannot be repaired; they must be replaced when they break or lose their tension. Because a spring is a mechanical component with a finite lifespan, replacing it with a new, high-quality spring is the only way to restore safe operation to your garage door.
Can you fix my garage door spring today?
Yes, we offer 24/7 service and can typically handle spring replacements on the same day you call. Since we are an independently owned and operated business, we prioritize getting your door back in service quickly, especially if your car is trapped inside.
Do I need to replace both springs if only one broke?
In most cases, yes, we recommend replacing both springs if you have a dual-spring system. Springs are usually installed at the same time and undergo the same amount of wear; if one has snapped, the other is likely near the end of its life as well. Replacing both ensures the door remains balanced and prevents a second service call in the near future.
Written by Marcus Deller, Owner at Servo Garage Doors Carrollton, serving Carrollton.